S3 stops working after update

dev google-group-archive
1

After finally updating to Lucee 5 I have updated the s3 extension as well
but now my files aren’t written, moved or copied to the destination. It
doesn’t do anything anymore.
Have tried did already on 2 different servers and both do the same. No
error… nothing but also no files on s3…

Is there anywhere some docs on this? Maybe I am doing something wrong but
the code has been working several years now already… except when I update
the extension on lucee5…

Regards, Tjarko

2

It’s on windows as well as on Ubuntu. No errors… nothing. Driving my crazy
at the moment because s3 is an integral part on all my software. Any help
is appreciated.Op maandag 10 oktober 2016 12:04:22 UTC+2 schreef Tjarko Rikkerink:

After finally updating to Lucee 5 I have updated the s3 extension as well
but now my files aren’t written, moved or copied to the destination. It
doesn’t do anything anymore.
Have tried did already on 2 different servers and both do the same. No
error… nothing but also no files on s3…

Is there anywhere some docs on this? Maybe I am doing something wrong but
the code has been working several years now already… except when I update
the extension on lucee5…

Regards, Tjarko

3

I remember having problems with Lucee 4.5 and S3, it was related to the versions of the httpcore and httpclient jar files.

I’m not sure if this is still relevant with lucee 5 but worth a look.

Regards,
Adam

4

We also had loads of problems with S3 following an update to lucee and the
s3 driver. In the end we dropped it and changed our components to use this
method of interacting with S3 via the rest interface. It’s faster too. The
problems seem to be related to the size of the bucket being used (as in
number of files):

Nathan

5

Same here. Large buckets could not be handled anymore with the open source
s3 driver of the S3 extension. We changed than to using directly the AWS
SDK extension.

But than run into memory problems and a huge increase of the non-heap
memory. A AWS SKD OSGi bundle which runs under Lucee could be the solution.

DanielAm Montag, 10. Oktober 2016 12:04:22 UTC+2 schrieb Tjarko Rikkerink:

After finally updating to Lucee 5 I have updated the s3 extension as well
but now my files aren’t written, moved or copied to the destination. It
doesn’t do anything anymore.
Have tried did already on 2 different servers and both do the same. No
error… nothing but also no files on s3…

Is there anywhere some docs on this? Maybe I am doing something wrong but
the code has been working several years now already… except when I update
the extension on lucee5…

Regards, Tjarko

6

Try Lucee 5 it now uses http://www.jets3t.org/

before Lucee used hand rolled REST

Thanks

AlexOn 28 October 2016 at 08:29, Daniel Schmid <@Daniel_Schmid> wrote:

Same here. Large buckets could not be handled anymore with the open source
s3 driver of the S3 extension. We changed than to using directly the AWS
SDK extension.
GitHub - mso-net/lucee-aws: Lucee extension to provide simpler access to common AWS commands through the AWS SDK

But than run into memory problems and a huge increase of the non-heap
memory. A AWS SKD OSGi bundle which runs under Lucee could be the solution.

Daniel

Am Montag, 10. Oktober 2016 12:04:22 UTC+2 schrieb Tjarko Rikkerink:

After finally updating to Lucee 5 I have updated the s3 extension as well
but now my files aren’t written, moved or copied to the destination. It
doesn’t do anything anymore.
Have tried did already on 2 different servers and both do the same. No
error… nothing but also no files on s3…

Is there anywhere some docs on this? Maybe I am doing something wrong but
the code has been working several years now already… except when I update
the extension on lucee5…

Regards, Tjarko

–
Get 10% off of the regular price for this years CFCamp in Munich, Germany
(Oct. 20th & 21st) with the Lucee discount code Lucee@cfcamp. 189€
instead of 210€. Visit https://ti.to/cfcamp/cfcamp-
2016/discount/Lucee@cfcamp

You received this message because you are subscribed to the Google Groups
“Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to lucee+unsubscribe@googlegroups.com.
To post to this group, send email to lucee@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/
msgid/lucee/66eb2f7f-bb37-44b9-9eff-6339c1d1ce65%40googlegroups.com
https://groups.google.com/d/msgid/lucee/66eb2f7f-bb37-44b9-9eff-6339c1d1ce65%40googlegroups.com?utm_medium=email&utm_source=footer
.

For more options, visit https://groups.google.com/d/optout.

–
Alex Skinner
Managing Director

Pixl8 Interactive, 3 Tun Yard, Peardon Street, London
SW8 3HT, United Kingdom

T: +44 [0] 845 260 0726• W: www.pixl8.co.uk• E: info@pixl8.co.uk

Follow us on: Facebook http://www.facebook.com/pixl8 Twitter
http://www.twitter.com/pixl8 LinkedIn http://www.linkedin.com/pixl8

CONFIDENTIAL AND PRIVILEGED - This e-mail and any attachment is intended
solely for the addressee, is strictly confidential and may also be subject
to legal, professional or other privilege or may be protected by work
product immunity or other legal rules. If you are not the addressee please
do not read, print, re-transmit, store or act in reliance on it or any
attachments. Instead, please email it back to the sender and then
immediately permanently delete it. Pixl8 Interactive Ltd Registered in
England. Registered number: 04336501. Registered office: 8 Spur Road,
Cosham, Portsmouth, Hampshire, PO6 3EB

7

Can’t offer any advice about fixing your issue but have you filed a proper
issue in the bug tracker (https://luceeserver.atlassian.net/)?

Also, they offer premium support via Rasia (http://www.rasia.ch/). Have you
considered paying for support with this since it’s essential to your
production servers?

Warm regards,

MikeOn Thu, Nov 3, 2016 at 5:45 PM, Tjarko Rikkerink < @Tjarko_Rikkerink> wrote:

I have just installed a complete new ubuntu 16.04 with Lucee 5.1.0.34 and
the newest s3 extension and the same result… it’s not being send to
s3… it just hangs…white screen… nothing… WTF!!!

Why is NOBODY from Lucee responding to this?? It’s a major bug in my
opinion and I really can’t use Lucee 5 if this is not working correctly.

On windows however Lucee works… wel worked because after the newest
update Lucee doesn’t do anything anymore… only the index.cfm is loaded and
everything else give a blank screen. It’s SOOO frustratng and it’s not a
single incident. I have had this on 3 producten, 2 staging en 2 different
development machines already… installing lucee 5 and nothing works. Each
time I had to go back to 4.5 but that has issues with SNI SSL certificates.

Please answer… anyone from the Lucee group!! Micha??

–
Get 10% off of the regular price for this years CFCamp in Munich, Germany
(Oct. 20th & 21st) with the Lucee discount code Lucee@cfcamp. 189€
instead of 210€. Visit https://ti.to/cfcamp/cfcamp-
2016/discount/Lucee@cfcamp

You received this message because you are subscribed to the Google Groups
“Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to lucee+unsubscribe@googlegroups.com.
To post to this group, send email to lucee@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/
msgid/lucee/2e82def2-1895-4961-8cdf-5f8e6da40396%40googlegroups.com
https://groups.google.com/d/msgid/lucee/2e82def2-1895-4961-8cdf-5f8e6da40396%40googlegroups.com?utm_medium=email&utm_source=footer
.

For more options, visit https://groups.google.com/d/optout.

8

I have just installed a complete new ubuntu 16.04 with Lucee 5.1.0.34 and
the newest s3 extension and the same result… it’s not being send to
s3… it just hangs…white screen… nothing… WTF!!!

Why is NOBODY from Lucee responding to this?? It’s a major bug in my
opinion and I really can’t use Lucee 5 if this is not working correctly.

On windows however Lucee works… wel worked because after the newest
update Lucee doesn’t do anything anymore… only the index.cfm is loaded and
everything else give a blank screen. It’s SOOO frustratng and it’s not a
single incident. I have had this on 3 producten, 2 staging en 2 different
development machines already… installing lucee 5 and nothing works. Each
time I had to go back to 4.5 but that has issues with SNI SSL certificates.

Please answer… anyone from the Lucee group!! Micha??

9

First 5.1.034 is not an officiell stable release
Second, install the AWS SDK3 for S3.

DanielAm Donnerstag, 3. November 2016 22:45:16 UTC+1 schrieb Tjarko Rikkerink:

I have just installed a complete new ubuntu 16.04 with Lucee 5.1.0.34 and
the newest s3 extension and the same result… it’s not being send to
s3… it just hangs…white screen… nothing… WTF!!!

Why is NOBODY from Lucee responding to this?? It’s a major bug in my
opinion and I really can’t use Lucee 5 if this is not working correctly.

On windows however Lucee works… wel worked because after the newest
update Lucee doesn’t do anything anymore… only the index.cfm is loaded and
everything else give a blank screen. It’s SOOO frustratng and it’s not a
single incident. I have had this on 3 producten, 2 staging en 2 different
development machines already… installing lucee 5 and nothing works. Each
time I had to go back to 4.5 but that has issues with SNI SSL certificates.

Please answer… anyone from the Lucee group!! Micha??

10

New bug to watch: DirectoryExists() and FileExists() is extremely slow on
buckets with a large number of containers.
[LDEV-1176] - Lucee Monday, October 10, 2016 at 4:04:22 AM UTC-6, Tjarko Rikkerink wrote:

After finally updating to Lucee 5 I have updated the s3 extension as well
but now my files aren’t written, moved or copied to the destination. It
doesn’t do anything anymore.
Have tried did already on 2 different servers and both do the same. No
error… nothing but also no files on s3…

Is there anywhere some docs on this? Maybe I am doing something wrong but
the code has been working several years now already… except when I update
the extension on lucee5…

Regards, Tjarko