How is Lucee able to output the debug templates/information from the admin to screen?

I have searched and have not been able to find any information.

Is this a possibility?

Thanks!

Hi Josh,

You can turn on page level debugging in the web context admin under:

Debugging > Settings

and that will log debugging information for all page requests to the:

Debugging > Logs

section where you can set a limit for how many requests it stores logs for.

If you want them output to the browser, like ACF does, then you need to
define a debug template to do this under:

Debugging > Templates

and in the template you can define which IP’s the debugging information is
output for.

Please make sure you remember to switch debugging off again (under
Debugging > Settings) once you have the information you need as it does
slow requests down.

Hope that helps.

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.orgOn 18 May 2016 at 17:18, Josh Beach <@Josh_Beach> wrote:

I have searched and have not been able to find any information.

Is this a possibility?

Thanks!


Love Lucee? Become a supporter and be part of the Lucee project today! -
http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups
“Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to lucee+unsubscribe@googlegroups.com.
To post to this group, send email to lucee@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com?utm_medium=email&utm_source=footer
.
For more options, visit https://groups.google.com/d/optout.

Also, I have discovered that it is showing on some pages, following the
defaulted error information in orange.

I am not sure why it is showing on some pages, but not on others.On Wednesday, May 18, 2016 at 3:29:51 PM UTC-5, Josh Beach wrote:

I’ve checked the source code to see if anything referring to the debug
information was there and it was not.

Where do you recommend I search in our source code to see if anything is
overriding/changing this functionality?

As far as I can tell, there isn’t anything and it should be working.

On Wednesday, May 18, 2016 at 3:10:45 PM UTC-5, Mark Drew wrote:

Check the source. We have an application that uses a bootstrap theme that
stops the lucee debug showing. Annoying.

Mark Drew

  • Sent by typing with my thumbs.

On 18 May 2016, at 21:02, Josh Beach josh.r...@gmail.com wrote:

Thanks for the suggestions. I was able to see the debug information in
the browser by creating the simple page as you suggested.

Now I need to figure out why it’s not outputting to the browser in our
application.

On Wednesday, May 18, 2016 at 2:34:42 PM UTC-5, Andrew Dixon wrote:

Check the page source to make sure it is not being rendered into an
element in your HTML that is hidden by CSS or something.

Also, like Gert suggested, try it was a simple page that doesn’t do
much, maybe sets a variable and output the variable or something.

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.org

On 18 May 2016 at 20:32, Josh Beach josh.r...@gmail.com wrote:

The template type is classic.

On Wednesday, May 18, 2016 at 2:29:25 PM UTC-5, Andrew Dixon wrote:

Well, if you have the debugging switch on and a template defined and
for all IPs then it should be there, which template type are you using?

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.org

On 18 May 2016 at 20:22, Josh Beach josh.r...@gmail.com wrote:

Right we are trying to have it output to the browser like ACF.

I have a template set up, for all IP’s, but it is not outputting to
the browser like we had hoped, only to the Debugging → Logs section.

Any thoughts on how to troubleshoot this, Andrew? Appreciate your
help.

Josh

On Wednesday, May 18, 2016 at 1:02:42 PM UTC-5, Andrew Dixon wrote:

Hi Josh,

You can turn on page level debugging in the web context admin under:

Debugging > Settings

and that will log debugging information for all page requests to the:

Debugging > Logs

section where you can set a limit for how many requests it stores
logs for.

If you want them output to the browser, like ACF does, then you need
to define a debug template to do this under:

Debugging > Templates

and in the template you can define which IP’s the debugging
information is output for.

Please make sure you remember to switch debugging off again (under
Debugging > Settings) once you have the information you need as it does
slow requests down.

Hope that helps.

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net

On 18 May 2016 at 17:18, Josh Beach josh.r...@gmail.com wrote:

I have searched and have not been able to find any information.

Is this a possibility?

Thanks!


Love Lucee? Become a supporter and be part of the Lucee project
today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google
Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com?utm_medium=email&utm_source=footer
.
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project
today! - http://lucee.org/supporters/become-a-supporter.html


You received this message because you are subscribed to the Google
Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com
https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com?utm_medium=email&utm_source=footer
.

For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today!


You received this message because you are subscribed to the Google
Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/50b5fbf9-c57e-4ad8-9613-78d977b00827%40googlegroups.com
https://groups.google.com/d/msgid/lucee/50b5fbf9-c57e-4ad8-9613-78d977b00827%40googlegroups.com?utm_medium=email&utm_source=footer
.

For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! -
http://lucee.org/supporters/become-a-supporter.html


You received this message because you are subscribed to the Google Groups
“Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/32b679fb-6de2-4255-b3ff-59f51534eabd%40googlegroups.com
https://groups.google.com/d/msgid/lucee/32b679fb-6de2-4255-b3ff-59f51534eabd%40googlegroups.com?utm_medium=email&utm_source=footer
.
For more options, visit https://groups.google.com/d/optout.

@gert, if it is logging in the admin then it must be enabled right?

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.orgOn 18 May 2016 at 20:31, Gert Franz <@Gert_Franz> wrote:

Are you sure you have not turned off debugging output in your app?
Try a simple template with nothing but a few lines.
And it depends on the type of debugging you chose.
Check it first with a very easy setup.

Gert

Sent from somewhere on the road

Am 18.05.2016 um 21:22 schrieb Josh Beach <@Josh_Beach>:

Right we are trying to have it output to the browser like ACF.

I have a template set up, for all IP’s, but it is not outputting to the
browser like we had hoped, only to the Debugging → Logs section.

Any thoughts on how to troubleshoot this, Andrew? Appreciate your help.

Josh

On Wednesday, May 18, 2016 at 1:02:42 PM UTC-5, Andrew Dixon wrote:

Hi Josh,

You can turn on page level debugging in the web context admin under:

Debugging > Settings

and that will log debugging information for all page requests to the:

Debugging > Logs

section where you can set a limit for how many requests it stores logs
for.

If you want them output to the browser, like ACF does, then you need to
define a debug template to do this under:

Debugging > Templates

and in the template you can define which IP’s the debugging information
is output for.

Please make sure you remember to switch debugging off again (under
Debugging > Settings) once you have the information you need as it does
slow requests down.

Hope that helps.

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.org

On 18 May 2016 at 17:18, Josh Beach josh.r...@gmail.com wrote:

I have searched and have not been able to find any information.

Is this a possibility?

Thanks!


Love Lucee? Become a supporter and be part of the Lucee project today! -
http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google
Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com?utm_medium=email&utm_source=footer
.
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! -
http://lucee.org/supporters/become-a-supporter.html


You received this message because you are subscribed to the Google Groups
“Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to lucee+unsubscribe@googlegroups.com.
To post to this group, send email to lucee@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com
https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com?utm_medium=email&utm_source=footer
.
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! -
http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups
“Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to lucee+unsubscribe@googlegroups.com.
To post to this group, send email to lucee@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/E0ABB77F-7394-4784-AE65-1CC2F5C5A484%40rasia.ch
https://groups.google.com/d/msgid/lucee/E0ABB77F-7394-4784-AE65-1CC2F5C5A484%40rasia.ch?utm_medium=email&utm_source=footer
.

For more options, visit https://groups.google.com/d/optout.

Well, if you have the debugging switch on and a template defined and for
all IPs then it should be there, which template type are you using?

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.orgOn 18 May 2016 at 20:22, Josh Beach <@Josh_Beach> wrote:

Right we are trying to have it output to the browser like ACF.

I have a template set up, for all IP’s, but it is not outputting to the
browser like we had hoped, only to the Debugging → Logs section.

Any thoughts on how to troubleshoot this, Andrew? Appreciate your help.

Josh

On Wednesday, May 18, 2016 at 1:02:42 PM UTC-5, Andrew Dixon wrote:

Hi Josh,

You can turn on page level debugging in the web context admin under:

Debugging > Settings

and that will log debugging information for all page requests to the:

Debugging > Logs

section where you can set a limit for how many requests it stores logs
for.

If you want them output to the browser, like ACF does, then you need to
define a debug template to do this under:

Debugging > Templates

and in the template you can define which IP’s the debugging information
is output for.

Please make sure you remember to switch debugging off again (under
Debugging > Settings) once you have the information you need as it does
slow requests down.

Hope that helps.

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.org

On 18 May 2016 at 17:18, Josh Beach josh.r...@gmail.com wrote:

I have searched and have not been able to find any information.

Is this a possibility?

Thanks!


Love Lucee? Become a supporter and be part of the Lucee project today! -
http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google
Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com?utm_medium=email&utm_source=footer
.
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! -
http://lucee.org/supporters/become-a-supporter.html


You received this message because you are subscribed to the Google Groups
“Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to lucee+unsubscribe@googlegroups.com.
To post to this group, send email to lucee@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com
https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com?utm_medium=email&utm_source=footer
.

For more options, visit https://groups.google.com/d/optout.

Thanks for the suggestions. I was able to see the debug information in the
browser by creating the simple page as you suggested.

Now I need to figure out why it’s not outputting to the browser in our
application.On Wednesday, May 18, 2016 at 2:34:42 PM UTC-5, Andrew Dixon wrote:

Check the page source to make sure it is not being rendered into an
element in your HTML that is hidden by CSS or something.

Also, like Gert suggested, try it was a simple page that doesn’t do much,
maybe sets a variable and output the variable or something.

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.org

On 18 May 2016 at 20:32, Josh Beach <josh.r...@gmail.com <javascript:>> wrote:

The template type is classic.

On Wednesday, May 18, 2016 at 2:29:25 PM UTC-5, Andrew Dixon wrote:

Well, if you have the debugging switch on and a template defined and for
all IPs then it should be there, which template type are you using?

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.org

On 18 May 2016 at 20:22, Josh Beach josh.r...@gmail.com wrote:

Right we are trying to have it output to the browser like ACF.

I have a template set up, for all IP’s, but it is not outputting to the
browser like we had hoped, only to the Debugging → Logs section.

Any thoughts on how to troubleshoot this, Andrew? Appreciate your help.

Josh

On Wednesday, May 18, 2016 at 1:02:42 PM UTC-5, Andrew Dixon wrote:

Hi Josh,

You can turn on page level debugging in the web context admin under:

Debugging > Settings

and that will log debugging information for all page requests to the:

Debugging > Logs

section where you can set a limit for how many requests it stores logs
for.

If you want them output to the browser, like ACF does, then you need
to define a debug template to do this under:

Debugging > Templates

and in the template you can define which IP’s the debugging
information is output for.

Please make sure you remember to switch debugging off again (under
Debugging > Settings) once you have the information you need as it does
slow requests down.

Hope that helps.

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.org

On 18 May 2016 at 17:18, Josh Beach josh.r...@gmail.com wrote:

I have searched and have not been able to find any information.

Is this a possibility?

Thanks!


Love Lucee? Become a supporter and be part of the Lucee project
today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google
Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com?utm_medium=email&utm_source=footer
.
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today!


You received this message because you are subscribed to the Google
Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com
https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com?utm_medium=email&utm_source=footer
.

For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! -
http://lucee.org/supporters/become-a-supporter.html


You received this message because you are subscribed to the Google Groups
“Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to lucee+un...@googlegroups.com <javascript:>.
To post to this group, send email to lu...@googlegroups.com <javascript:>
.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/50b5fbf9-c57e-4ad8-9613-78d977b00827%40googlegroups.com
https://groups.google.com/d/msgid/lucee/50b5fbf9-c57e-4ad8-9613-78d977b00827%40googlegroups.com?utm_medium=email&utm_source=footer
.

For more options, visit https://groups.google.com/d/optout.

Check the page source to make sure it is not being rendered into an element
in your HTML that is hidden by CSS or something.

Also, like Gert suggested, try it was a simple page that doesn’t do much,
maybe sets a variable and output the variable or something.

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.orgOn 18 May 2016 at 20:32, Josh Beach <@Josh_Beach> wrote:

The template type is classic.

On Wednesday, May 18, 2016 at 2:29:25 PM UTC-5, Andrew Dixon wrote:

Well, if you have the debugging switch on and a template defined and for
all IPs then it should be there, which template type are you using?

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.org

On 18 May 2016 at 20:22, Josh Beach josh.r...@gmail.com wrote:

Right we are trying to have it output to the browser like ACF.

I have a template set up, for all IP’s, but it is not outputting to the
browser like we had hoped, only to the Debugging → Logs section.

Any thoughts on how to troubleshoot this, Andrew? Appreciate your help.

Josh

On Wednesday, May 18, 2016 at 1:02:42 PM UTC-5, Andrew Dixon wrote:

Hi Josh,

You can turn on page level debugging in the web context admin under:

Debugging > Settings

and that will log debugging information for all page requests to the:

Debugging > Logs

section where you can set a limit for how many requests it stores logs
for.

If you want them output to the browser, like ACF does, then you need to
define a debug template to do this under:

Debugging > Templates

and in the template you can define which IP’s the debugging information
is output for.

Please make sure you remember to switch debugging off again (under
Debugging > Settings) once you have the information you need as it does
slow requests down.

Hope that helps.

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.org

On 18 May 2016 at 17:18, Josh Beach josh.r...@gmail.com wrote:

I have searched and have not been able to find any information.

Is this a possibility?

Thanks!


Love Lucee? Become a supporter and be part of the Lucee project today!


You received this message because you are subscribed to the Google
Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com?utm_medium=email&utm_source=footer
.
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! -
http://lucee.org/supporters/become-a-supporter.html


You received this message because you are subscribed to the Google
Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com
https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com?utm_medium=email&utm_source=footer
.

For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! -
http://lucee.org/supporters/become-a-supporter.html


You received this message because you are subscribed to the Google Groups
“Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to lucee+unsubscribe@googlegroups.com.
To post to this group, send email to lucee@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/50b5fbf9-c57e-4ad8-9613-78d977b00827%40googlegroups.com
https://groups.google.com/d/msgid/lucee/50b5fbf9-c57e-4ad8-9613-78d977b00827%40googlegroups.com?utm_medium=email&utm_source=footer
.

For more options, visit https://groups.google.com/d/optout.

Are you sure you have not turned off debugging output in your app?
Try a simple template with nothing but a few lines.
And it depends on the type of debugging you chose.
Check it first with a very easy setup.

GertSent from somewhere on the road

Am 18.05.2016 um 21:22 schrieb Josh Beach <@Josh_Beach>:

Right we are trying to have it output to the browser like ACF.

I have a template set up, for all IP’s, but it is not outputting to the browser like we had hoped, only to the Debugging → Logs section.

Any thoughts on how to troubleshoot this, Andrew? Appreciate your help.

Josh

On Wednesday, May 18, 2016 at 1:02:42 PM UTC-5, Andrew Dixon wrote:
Hi Josh,

You can turn on page level debugging in the web context admin under:

Debugging > Settings

and that will log debugging information for all page requests to the:

Debugging > Logs

section where you can set a limit for how many requests it stores logs for.

If you want them output to the browser, like ACF does, then you need to define a debug template to do this under:

Debugging > Templates

and in the template you can define which IP’s the debugging information is output for.

Please make sure you remember to switch debugging off again (under Debugging > Settings) once you have the information you need as it does slow requests down.

Hope that helps.

Kind regards,

Andrew
about.me - mso - Lucee Association Member

On 18 May 2016 at 17:18, Josh Beach josh.r...@gmail.com wrote:
I have searched and have not been able to find any information.

Is this a possibility?

Thanks!

Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+unsubscribe@googlegroups.com.
To post to this group, send email to lucee@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

The template type is classic.On Wednesday, May 18, 2016 at 2:29:25 PM UTC-5, Andrew Dixon wrote:

Well, if you have the debugging switch on and a template defined and for
all IPs then it should be there, which template type are you using?

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.org

On 18 May 2016 at 20:22, Josh Beach <josh.r...@gmail.com <javascript:>> wrote:

Right we are trying to have it output to the browser like ACF.

I have a template set up, for all IP’s, but it is not outputting to the
browser like we had hoped, only to the Debugging → Logs section.

Any thoughts on how to troubleshoot this, Andrew? Appreciate your help.

Josh

On Wednesday, May 18, 2016 at 1:02:42 PM UTC-5, Andrew Dixon wrote:

Hi Josh,

You can turn on page level debugging in the web context admin under:

Debugging > Settings

and that will log debugging information for all page requests to the:

Debugging > Logs

section where you can set a limit for how many requests it stores logs
for.

If you want them output to the browser, like ACF does, then you need to
define a debug template to do this under:

Debugging > Templates

and in the template you can define which IP’s the debugging information
is output for.

Please make sure you remember to switch debugging off again (under
Debugging > Settings) once you have the information you need as it does
slow requests down.

Hope that helps.

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.org

On 18 May 2016 at 17:18, Josh Beach josh.r...@gmail.com wrote:

I have searched and have not been able to find any information.

Is this a possibility?

Thanks!


Love Lucee? Become a supporter and be part of the Lucee project today!


You received this message because you are subscribed to the Google
Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com?utm_medium=email&utm_source=footer
.
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! -
http://lucee.org/supporters/become-a-supporter.html


You received this message because you are subscribed to the Google Groups
“Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to lucee+un...@googlegroups.com <javascript:>.
To post to this group, send email to lu...@googlegroups.com <javascript:>
.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com
https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com?utm_medium=email&utm_source=footer
.

For more options, visit https://groups.google.com/d/optout.

Check the source. We have an application that uses a bootstrap theme that stops the lucee debug showing. Annoying.

Mark Drew

  • Sent by typing with my thumbs.> On 18 May 2016, at 21:02, Josh Beach <@Josh_Beach> wrote:

Thanks for the suggestions. I was able to see the debug information in the browser by creating the simple page as you suggested.

Now I need to figure out why it’s not outputting to the browser in our application.

On Wednesday, May 18, 2016 at 2:34:42 PM UTC-5, Andrew Dixon wrote:
Check the page source to make sure it is not being rendered into an element in your HTML that is hidden by CSS or something.

Also, like Gert suggested, try it was a simple page that doesn’t do much, maybe sets a variable and output the variable or something.

Kind regards,

Andrew
about.me - mso - Lucee Association Member

On 18 May 2016 at 20:32, Josh Beach josh.r...@gmail.com wrote:
The template type is classic.

On Wednesday, May 18, 2016 at 2:29:25 PM UTC-5, Andrew Dixon wrote:
Well, if you have the debugging switch on and a template defined and for all IPs then it should be there, which template type are you using?

Kind regards,

Andrew
about.me - mso - Lucee Association Member

On 18 May 2016 at 20:22, Josh Beach josh.r...@gmail.com wrote:
Right we are trying to have it output to the browser like ACF.

I have a template set up, for all IP’s, but it is not outputting to the browser like we had hoped, only to the Debugging → Logs section.

Any thoughts on how to troubleshoot this, Andrew? Appreciate your help.

Josh

On Wednesday, May 18, 2016 at 1:02:42 PM UTC-5, Andrew Dixon wrote:
Hi Josh,

You can turn on page level debugging in the web context admin under:

Debugging > Settings

and that will log debugging information for all page requests to the:

Debugging > Logs

section where you can set a limit for how many requests it stores logs for.

If you want them output to the browser, like ACF does, then you need to define a debug template to do this under:

Debugging > Templates

and in the template you can define which IP’s the debugging information is output for.

Please make sure you remember to switch debugging off again (under Debugging > Settings) once you have the information you need as it does slow requests down.

Hope that helps.

Kind regards,

Andrew
about.me - mso - Lucee Association Member

On 18 May 2016 at 17:18, Josh Beach josh.r...@gmail.com wrote:
I have searched and have not been able to find any information.

Is this a possibility?

Thanks!

Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/50b5fbf9-c57e-4ad8-9613-78d977b00827%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+unsubscribe@googlegroups.com.
To post to this group, send email to lucee@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/32b679fb-6de2-4255-b3ff-59f51534eabd%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Right we are trying to have it output to the browser like ACF.

I have a template set up, for all IP’s, but it is not outputting to the
browser like we had hoped, only to the Debugging → Logs section.

Any thoughts on how to troubleshoot this, Andrew? Appreciate your help.

JoshOn Wednesday, May 18, 2016 at 1:02:42 PM UTC-5, Andrew Dixon wrote:

Hi Josh,

You can turn on page level debugging in the web context admin under:

Debugging > Settings

and that will log debugging information for all page requests to the:

Debugging > Logs

section where you can set a limit for how many requests it stores logs for.

If you want them output to the browser, like ACF does, then you need to
define a debug template to do this under:

Debugging > Templates

and in the template you can define which IP’s the debugging information is
output for.

Please make sure you remember to switch debugging off again (under
Debugging > Settings) once you have the information you need as it does
slow requests down.

Hope that helps.

Kind regards,

Andrew
about.me http://about.me/andrew_dixon - mso http://www.mso.net - Lucee
Association Member http://lucee.org

On 18 May 2016 at 17:18, Josh Beach <josh.r...@gmail.com <javascript:>> wrote:

I have searched and have not been able to find any information.

Is this a possibility?

Thanks!


Love Lucee? Become a supporter and be part of the Lucee project today! -
http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups
“Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to lucee+un...@googlegroups.com <javascript:>.
To post to this group, send email to lu...@googlegroups.com <javascript:>
.
To view this discussion on the web visit
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com
https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com?utm_medium=email&utm_source=footer
.
For more options, visit https://groups.google.com/d/optout.

Josh,

As I stated before, please try adding cfaborts into your code so that it stops and then you see when the debugging is not displayed anymore. Then you know the line where it happens.

Sincerely
Gert Franz

RASIA GmbH

Spittelgasse 7

5103 Moeriken-Wildegg

Switzerland

Email: mailto:Gert_Franz @Gert_Franz
Skype: gert.franz

Phone Switzerland: +41 76 5680 231Von: lucee@googlegroups.com [mailto:lucee@googlegroups.com] Im Auftrag von Josh Beach
Gesendet: Mittwoch, 18. Mai 2016 22:38
An: Lucee
Betreff: Re: [Lucee] How is Lucee able to output the debug templates/information from the admin to screen?

Also, I have discovered that it is showing on some pages, following the defaulted error information in orange.

I am not sure why it is showing on some pages, but not on others.

On Wednesday, May 18, 2016 at 3:29:51 PM UTC-5, Josh Beach wrote:

I’ve checked the source code to see if anything referring to the debug information was there and it was not.

Where do you recommend I search in our source code to see if anything is overriding/changing this functionality?

As far as I can tell, there isn’t anything and it should be working.

On Wednesday, May 18, 2016 at 3:10:45 PM UTC-5, Mark Drew wrote:

Check the source. We have an application that uses a bootstrap theme that stops the lucee debug showing. Annoying.

Mark Drew

  • Sent by typing with my thumbs.

On 18 May 2016, at 21:02, Josh Beach josh.r...@gmail.com wrote:

Thanks for the suggestions. I was able to see the debug information in the browser by creating the simple page as you suggested.

Now I need to figure out why it’s not outputting to the browser in our application.

On Wednesday, May 18, 2016 at 2:34:42 PM UTC-5, Andrew Dixon wrote:

Check the page source to make sure it is not being rendered into an element in your HTML that is hidden by CSS or something.

Also, like Gert suggested, try it was a simple page that doesn’t do much, maybe sets a variable and output the variable or something.

Kind regards,

Andrew

about.me http://about.me/andrew_dixon - mso http://www.mso.net - http://lucee.org Lucee Association Member

On 18 May 2016 at 20:32, Josh Beach josh.r...@gmail.com wrote:

The template type is classic.

On Wednesday, May 18, 2016 at 2:29:25 PM UTC-5, Andrew Dixon wrote:

Well, if you have the debugging switch on and a template defined and for all IPs then it should be there, which template type are you using?

Kind regards,

Andrew

about.me http://about.me/andrew_dixon - mso http://www.mso.net - http://lucee.org Lucee Association Member

On 18 May 2016 at 20:22, Josh Beach josh.r...@gmail.com wrote:

Right we are trying to have it output to the browser like ACF.

I have a template set up, for all IP’s, but it is not outputting to the browser like we had hoped, only to the Debugging → Logs section.

Any thoughts on how to troubleshoot this, Andrew? Appreciate your help.

Josh

On Wednesday, May 18, 2016 at 1:02:42 PM UTC-5, Andrew Dixon wrote:

Hi Josh,

You can turn on page level debugging in the web context admin under:

Debugging > Settings

and that will log debugging information for all page requests to the:

Debugging > Logs

section where you can set a limit for how many requests it stores logs for.

If you want them output to the browser, like ACF does, then you need to define a debug template to do this under:

Debugging > Templates

and in the template you can define which IP’s the debugging information is output for.

Please make sure you remember to switch debugging off again (under Debugging > Settings) once you have the information you need as it does slow requests down.

Hope that helps.

Kind regards,

Andrew

about.me http://about.me/andrew_dixon - mso http://www.mso.net - http://lucee.org Lucee Association Member

On 18 May 2016 at 17:18, Josh Beach josh.r...@gmail.com wrote:

I have searched and have not been able to find any information.

Is this a possibility?

Thanks!


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com?utm_medium=email&utm_source=footer .
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com?utm_medium=email&utm_source=footer .

For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/50b5fbf9-c57e-4ad8-9613-78d977b00827%40googlegroups.com https://groups.google.com/d/msgid/lucee/50b5fbf9-c57e-4ad8-9613-78d977b00827%40googlegroups.com?utm_medium=email&utm_source=footer .

For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/32b679fb-6de2-4255-b3ff-59f51534eabd%40googlegroups.com https://groups.google.com/d/msgid/lucee/32b679fb-6de2-4255-b3ff-59f51534eabd%40googlegroups.com?utm_medium=email&utm_source=footer .
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+unsubscribe@googlegroups.com.
To post to this group, send email to lucee@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/a3e0e5b2-9339-4bfc-b183-f7ab7138bd28%40googlegroups.com https://groups.google.com/d/msgid/lucee/a3e0e5b2-9339-4bfc-b183-f7ab7138bd28%40googlegroups.com?utm_medium=email&utm_source=footer .
For more options, visit https://groups.google.com/d/optout.

Then the easiest way to check it out to introduce aborts intob the code until you figure out out.

GertSent from somewhere on the road

Am 18.05.2016 um 22:29 schrieb Josh Beach <@Josh_Beach>:

I’ve checked the source code to see if anything referring to the debug information was there and it was not.

Where do you recommend I search in our source code to see if anything is overriding/changing this functionality?

As far as I can tell, there isn’t anything and it should be working.

On Wednesday, May 18, 2016 at 3:10:45 PM UTC-5, Mark Drew wrote:
Check the source. We have an application that uses a bootstrap theme that stops the lucee debug showing. Annoying.

Mark Drew

  • Sent by typing with my thumbs.

On 18 May 2016, at 21:02, Josh Beach josh.r...@gmail.com wrote:

Thanks for the suggestions. I was able to see the debug information in the browser by creating the simple page as you suggested.

Now I need to figure out why it’s not outputting to the browser in our application.

On Wednesday, May 18, 2016 at 2:34:42 PM UTC-5, Andrew Dixon wrote:
Check the page source to make sure it is not being rendered into an element in your HTML that is hidden by CSS or something.

Also, like Gert suggested, try it was a simple page that doesn’t do much, maybe sets a variable and output the variable or something.

Kind regards,

Andrew
about.me - mso - Lucee Association Member

On 18 May 2016 at 20:32, Josh Beach josh.r...@gmail.com wrote:
The template type is classic.

On Wednesday, May 18, 2016 at 2:29:25 PM UTC-5, Andrew Dixon wrote:
Well, if you have the debugging switch on and a template defined and for all IPs then it should be there, which template type are you using?

Kind regards,

Andrew
about.me - mso - Lucee Association Member

On 18 May 2016 at 20:22, Josh Beach josh.r...@gmail.com wrote:
Right we are trying to have it output to the browser like ACF.

I have a template set up, for all IP’s, but it is not outputting to the browser like we had hoped, only to the Debugging → Logs section.

Any thoughts on how to troubleshoot this, Andrew? Appreciate your help.

Josh

On Wednesday, May 18, 2016 at 1:02:42 PM UTC-5, Andrew Dixon wrote:
Hi Josh,

You can turn on page level debugging in the web context admin under:

Debugging > Settings

and that will log debugging information for all page requests to the:

Debugging > Logs

section where you can set a limit for how many requests it stores logs for.

If you want them output to the browser, like ACF does, then you need to define a debug template to do this under:

Debugging > Templates

and in the template you can define which IP’s the debugging information is output for.

Please make sure you remember to switch debugging off again (under Debugging > Settings) once you have the information you need as it does slow requests down.

Hope that helps.

Kind regards,

Andrew
about.me - mso - Lucee Association Member

On 18 May 2016 at 17:18, Josh Beach josh.r...@gmail.com wrote:
I have searched and have not been able to find any information.

Is this a possibility?

Thanks!

Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/84b7d70b-e311-4ba6-b894-60a1102f9742%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/f8b6a44a-14e1-477a-b265-6e2ad7038bf8%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/50b5fbf9-c57e-4ad8-9613-78d977b00827%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+un...@googlegroups.com.
To post to this group, send email to lu...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/32b679fb-6de2-4255-b3ff-59f51534eabd%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Love Lucee? Become a supporter and be part of the Lucee project today! - http://lucee.org/supporters/become-a-supporter.html

You received this message because you are subscribed to the Google Groups “Lucee” group.
To unsubscribe from this group and stop receiving emails from it, send an email to lucee+unsubscribe@googlegroups.com.
To post to this group, send email to lucee@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/lucee/00ead725-77ce-495f-9d8f-e21181324cd4%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

So, this information is incorrect - enabling the Lucee debugging template, and specifying my IP (or even ‘*’) doesn’t result in any debugging information coming to my browser. Is there an update someplace with accurate information on how to enable this behavior under Lucee?

Did you set it up like shown in this video from Mark Drew? This video is something old, but should still work like that.

https://youtu.be/3iuV63W71Co

If you still can’t see any debugging information:

  • Make sure you are enabling debugging in the same web context you are wanting to see the debugging information (enabling debugging in the admin of web-context for http://localhost:8888/lucee/admin/web.cfm will output for localhost only and not for http://some-domain.com)

  • make sure you have enabled (and not disabled) debugging at application level (cfsetting with attribute showdebugoutput=“true”).